Faucet common problem

Small faucets, related to all aspects of home decoration, in this, for everybody to inventory faucets at home in different places of the installation method. And netizens often encountered a series of faucet problems, hoping to bring convenience and ease to everyone's home.

NO.1 Installation of faucets
Prepare installation tools, check the complete set of parts before installation, common faucet accessories are: hose, rubber washer, flower sprinkler, water, crutches, decorative caps, etc.

1.Installation of single hole basin faucet

When purchasing single- handled faucet basin, we should pay attention to the diameter of nozzle. Now most of the faucets in the market belong to the hard pipe, so you should pay attention to reserving the height of the water inlet, and 35 working hours from the basin down is the most appropriate. When installing, the special angle valve must be selected, and the angle valve must be fixed with the hot and cold water pipe of the wall. When you find a distance between the angle valve and the faucet, buy a special extension tube to connect it. Remember, do not use other pipes to connect, because if the water pressure is high, it is easy to fall off, leakage, causing you loss. If the intake pipe is too long to exceed the outlet pipe, you can cut off the part according to your needs, if the angle is not appropriate, you can bend to the position you need. Remember: do not bend hard to 90 degrees or greater than 90 degrees. Please do not forget to buy the small interface (tap short) for the faucet when you install the basin. Before you install, don't forget to wash the pipes buried in the wall ahead of time.

2.Installation of shower and bathtub faucet (wall)

When you buy Shower, bathtub and wall tap, you can choose the right height to bury the outlet pipe. The distance between hot and cold water pipes must reach 15 centimeters. Do not forget to flush the water pipe before installation, so as to avoid water quality and damage the tap. Dark installed shower and Bathtub Faucet: after purchasing the concealed tap, the spool of the faucet should be embedded in the wall. We must pay attention to the thickness of toilet wall before embedding. If the wall is too thin, the spool will not be buried. The plastic cover of the valve core should not be removed easily during embedding to avoid damage to the valve core by cement and other chores during embedding. In addition, when embedding the spool, attention should be paid to the direction of the spool, so as to avoid the spool embedding error. When the wall faucet is embedded in the water inlet pipe, the size of the water inlet pipe is deviant, and the adjustable hook can be used for the calibration.

3.Installation of thermostatic faucet

Before installing the constant temperature faucet, please check whether the water pipe is left hot and right cold, remember not to connect the cold and hot water pipe wrong, so as to avoid the faucet can not work properly. Gas and solar water heaters can not use thermostatic faucet because water pressure is too low. Do not forget to install hot and cold filter screen when installing thermostatic tap.

4.Installation of Single Hole Kitchen Faucet

Requirements for stability, because the kitchen faucet is used more frequently, coupled with being moved around, very easy to loose, so the lock nut must be tightened. At present, there are some taps on the market to increase the nut fixation for the spiral pipe, this solid effect is very good, if you can solve the problem of water removal and pulling, it will be a popular trend in the future.